Rosemount 848T Bedienungsanleitung PDF herunterladen (Seite 15)

Quick Start Guide

January 2015

I6 CSA Intrinsically Safe and Division 2

Certificate: 1261865

Standards: CAN/CSA C22.2 No. 0-M91 (R2001), CAN/CSA C22.2 No. 94-M91,

CSA Std. C22.2 No. 142-M1987, CSA Std. C22.2 No. 157-92,

CSA Std. C22.2 No. 213-M1987, CSA Std. C22.2 No. 60529:05

Markings: Intrinsically Safe for Class I, Division 1, Groups A, B, C, and D;

T3C(-50 °C

≤ T

≤ +60 °C) when installed per Rosemount drawing

00848-4405; Class I, Division 2, Groups A, B, C, D;

T3C(-50 °C ≤ T

≤ +60 °C) when installed per Rosemount drawing

00848-4405

IF CSA FISCO

Certificate: 1261865

Standards: CAN/CSA C22.2 No. 0-M91 (R2001), CAN/CSA C22.2 No. 94-M91,

CSA Std. C22.2 No. 142-M1987, CSA Std. C22.2 No. 157-92,

CSA Std. C22.2 No. 213-M1987, CSA Std. C22.2 No. 60529:05

Markings: Intrinsically Safe for Class I, Division 1, Groups A, B, C, and D;

T3C(-50 °C

≤ T

≤ +60 °C) when installed per Rosemount drawing

00848-4405; Class I, Division 2, Groups A, B, C, D;

T3C(-50 °C ≤ T

≤ +60 °C) when installed per Rosemount drawing

00848-4405

N6 CSA Division 2 and Dust-Ignitionproof (enclosure required)

Certificate: 1261865

Standards: CAN/CSA C22.2 No. 0-M91 (R2001), CSA Std. C22.2 No. 30-M1986,

CAN/CSA C22.2 No. 94-M91, CSA Std. C22.2 No. 142-M1987,

CSA Std. C22.2 No. 213-M1987, CSA Std. C22.2 No. 60529:05

Markings: Class I, Division 2, Groups A, B, C, and D; T3C(-50 °C

≤ T

≤ +60 °C) when

installed per Rosemount drawing 00848-4405; Dust-Ignitionproof for

Class II, Division 1, Groups E, F, and G; Class III; Conduit Seal Required

Europe

I1 ATEX Intrinsic Safety

Certificate: Baseefa09ATEX0093X

Standards: EN 60079-0:2012, EN60079-11:2012

Markings: II 1 G Ex ia IIC T4 Ga (-50 °C

≤ T

≤ +60 °C) when installed per drawing

00848-4406

Special Conditions for Safe Use (X):

1. The equipment must be installed in an enclosure that provides a degree of

protection of at least IP20. Non-metallic enclosures must be suitable to

prevent electrostatic hazards and light alloy or zirconium enclosures must be

protected from impact and friction when installed.

2. The equipment is note capable of withstanding the 500 V insulation test

required by EN 60079-11:2012, clause 6.3.13. This must be taken into

account when installing the equipment.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Rosemount 848T Bedienungsanleitung Seite 15

Kommentare zu diesen Handbüchern