Rosemount Smart Wireless Gateway Spezifikationen PDF herunterladen (Seite 14)

Reference Manual

00809-0200-4420, Rev HB

Section 2: Initial Connection

January 2015

Initial Connection

2.2 System requirements

The following requirements apply to the PC/laptop used to configure the Gateway. Additional

requirements may apply if using the optional Security Setup Utility or AMS

Wireless

Configurator. See 00809-0200-4420, Rev HB for more information.

Web browser applications

 Mozilla Firefox

1.5 or higher

 Microsoft

Internet Explorer

6.0 or higher

Ethernet

 10/100BaseTX Ethernet communication protocol

2.3 Initial setup

2.3.1 Prepare PC/laptop

The PC/laptop will need to be configured to form a private network before communicating to

the Gateway. The network settings can be found in the control panel of the PC/laptop. To

configure these settings:

1. Find and open the Control Panel (Generally found from the Start Menu).

2. Open Network Connections.

3. Select Local Area Connection.

4. Right click the mouse and select Properties from the list.

5. Select Internet Protocol (TCP/IP), then select Properties.

6. From the General tab, select Use the following IP address.

7. Set the IP Address to “192.168.1.12” and select Tab.

8. A Subnet mask of 255.255.255.0 should fill in automatically.

9. Select OK to close the Internet Protocol (TCP/IP) window.

10. Select Close on the Local Area Connection window.

Internet proxies will need to be disabled through the PC/laptop’s default internet browser.

1. Find and open the default internet browser (typically Microsoft Internet Explorer).

2. Find the Tools menu and select Internet Options.

3. From the Connections tab, select LAN Settings.

4. Under Proxy Server, verify the boxes for Automatically Detect Settings and Use a proxy

server for your LAN are unchecked.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 85 86

Keine Kommentare

Rosemount Smart Wireless Gateway Spezifikationen Seite 14