Rosemount Smart Wireless Gateway Spezifikationen PDF herunterladen (Seite 72)

Reference Manual

00809-0200-4420, Rev HB

Appendix C: DeltaV Ready

January 2015

C.4 Mounting and connecting

Mount the DeltaV Ready Gateway in the same manner as a standard Gateway. (“Mounting” on

page 16). The Gateway should be mounted in a location that allows convenient access to the

DeltaV control network as well as the wireless field network.

Connect the Gateway’s primary Ethernet port (Ethernet 1) into the DeltaV primary control

network. If the dual Ethernet option (Physical Connection code 2) was ordered with the

Gateway, connect the secondary Ethernet port (Ethernet 2) into the DeltaV secondary control

network.

Figure C-1. Delta V Control Network Architecture

C.5 Setup

Out of the box the Smart Wireless Gateway is pre-configured for use on the DeltaV control

network. In the DeltaV Explore application, the Gateway will automatically appear in the

Decommissioned Nodes folder.

To setup a wireless network will require 3 steps:

1. Commission the Gateway.

2. Assign wireless device tags.

3. Assign Gateway to controller and download.

A. Pro+ Engineering Station

B. Primary Control Network

C. Secondary Control Network

D. Controller and I/O

E. Smart Wireless Gateway

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 85 86

Keine Kommentare

Rosemount Smart Wireless Gateway Spezifikationen Seite 72